Contact

Feel free to contact me on: +47 95929908
Or send me an email on: lars@werner.no

0 Replies to “Contact”

  1. hey lars,
    first a big thx to you you did nice work, im enjoying working with both programms (unpacker+sizeme)
    but i have some problems with newest version of sizeme, where can i get an older version.

  2. Is there a way to creat disks with the flienames alphabetical in size me ? I have a ton of tv shows to burn and Id like to keep them in order.

    Thank You

    Steve

  3. steve: The next v2.0 will contain a function that will make things in order (without any optimize). Be sure to check the site for when it is released, or use check for updates button in SizeMe

  4. I have failed at my first attempt.

    The program made a DVD compilation for me, and I copied it into Nero 6. It showed as 4.5GB. When I proceeded to burn, I received the error message “there is not enough space to burn this compilation onto this disc”. The disc is a Verbatim DVD+R.

  5. I am having same problem as James described above. I created 5 “files-to-burn” projects in both Ashampoo Burning Studio 6.02 and in Nero Burning Rom 6.0.1.8 and I got this problem: The 1st ISo won’t get be burned in Ashampoo [it said there’s not enough space] and then I tried in Nero and it burned it fine. So then I tried burn the 2nd ISO [with same filesize provided by SizeMe, but both softwares said the same message [not enough space]. Is there any problem with Constant Size in DVD-5? I burned one DVD and I don’t want to waste my backups, so I’m going back to older version until that “issue” be fixed. Ok?

  6. DanceMania: Sometimes the FindFile API failes on certain sizes, or the number of files/directories are quite large that would fail on burning certain compilations. To handle this problem just downsize the size in SizeMe to something a little lower. SizeMe does calculate the overload sizes a directory/file has in a compilation, but the sizes varies, so it uses a middelway 🙂

  7. Dear Lars, I decreased to Custom Size [DVD-5] to 4480 MB, and now Nero Burning ROM is working fine [different of Ashampoo Bunning Studio wich burned one dvd with usual 4482 MB, but got any error after burned dvd – oversized?]. Seems it fix the ‘not enough space’ issue.. do you think is possible to add addon or a shortcut to create “burning projects” to put directly into burn softwares, I mean: rigght click on Disc1 (99%) and the choose something like ‘Burn with Nero’ or ‘Burn With…’ [using a path provided by user]. Also, I want to know if those ISOs made by SizeMe will add files to an ISO or will create a kind of ‘link’ to files I want to backup [as long as I only backup mp3 files, singles, cds, vinyls in mp3 format, etc.]

    Also, I’d ask you if is possible to add all comments to RSS feed.

    And thanks for the fast answer.

  8. Oh another question: how is possible to let SizeMe read different folders in different drives [i.e. C:\MP3_new_files\New Singles and D:\MP3_new_files\New Singles] and then supplly the DiscX files? I hate when I see Disc6 (8%), lol.

  9. DanceMania: You can also send me e-mails on this you know 🙂 A direct link into the burning programs has not been included, because it does not work so well. The best (and safest) way is to drag’n’drop files into the project, that way SizeMe does nothing else than provide a filelist to the program you’ll useing. But I’m thinking of implementing the Nero Burn SDK into SizeMe so you can directly burn stuff in the queue. ISO files does not link, they hardcopy the file into the ISO structure. So if you’re doing a backup then you’ll need to create new iso files each time. It is not possible (at this time) to add more directories for comparison. I’ll add support like Ignition does at a later time (a groupsystem). RSS feeds on comments will be publish as news when ready 🙂

  10. SizeMe: Great program, only downside I can find is the inability to break large folders up over multiple DVDs/CDs automatically.

  11. Lars

    Just the program I’m looking for. I have a directory that has 4 subfolders in it each subfolder has 126 subfolders with files in them. When I run sizeme to put them to a dvd I’m getting only about 45 % used, is this because you do not want to keep the subfolders together?

  12. Hello Lars, I need a program that does what SizeMe does, but for audio CD’s, based on TIME not file size. Do you have a product like that? or do you plan to offer this feature in the next release of size me? Thanks.

  13. Hi there,
    can u add a (add another directory) function to SizeMe???
    the best reason to use this program is when we’re running out of disk space and want to burn stuff on dvd’s. and my stuff are divided into hdd’s. I’d like SizeMe to look at all those folders and get the sizes from them and do its thing.

  14. Absolutely superb unpacker program Lars. Exactly what I was looking for and free…I don’t believe it! One thing that you could possibly add for the next version would be the option to permanently have a setting a location for the unpacked archives instead of having to right click the selected ones to get this functionality each time. The program is still amazing and I thank you very much!

  15. Hey, love the idea of muting commercials in Spotify with SpotiAmp, but im a Mac user today, so ill just have to wait for someone to make something like this for Mac OSX 10.6..
    Du kunne ikke lagd den til Mac du?

  16. Hey Lars,

    Have you run across a way to use adito to gain an IP address on an internal network without having to publish resources? Basicly an SSL VPN client/adapter?

  17. Hey. Thougt I would just stop by and say that SpotiAmp works great with Windows 7 x64. Hotkeys even so… The mute button volume buttons don’t work for me but hey, I only use hotkeys and for that reson i downloaded it. Much thanks for a great ap! Regards from sweden!

  18. Hi

    Here’s a nasty bug I’ve found in unpacker. It seems to have something to do with “part” in the file names. Example;

    best.of.top.gear.series.8.part4.ws.pdtv.xvid-remax.r06
    topgear.part1-gothic.r01

    If i use unpacker manually to extract those archives, it doesn’t see it as an archive and does nothing, but if i use auto unpacker it does the same thing but with a nasty result of all the rar files deleted and of course the *.avi never extracted.

    As soon as i remove the “part(number)” from the filenames unpacker works as expected.

    So far ive been lucky to not use auto packer on all archives

  19. Hi Lars Werner,
    first of all : Thanks for the awesome Tools
    my problem is i cant download “SizeMe 2” i downloaded the older version but i also cant update it. Thanks a lot and have a nice day

  20. Hi Lars
    Just tried out SizeMe to split up a 7.5Gb folder so that I could copy the files to dvd. All seemed to have gone well and I had produced two separate folders with my files. I then tried to burn the larger of the two to dvd but got an error telling me that the disk was not large enough to accomodate the files. I then had to manually take a number of files from the larger to the smaller folder and then was eventually able to complete the process and produce two dvd’s.
    Do you know what might have gone wrong? I like your program. I have been searching for a means of spanning large numbers of files to dvd for a long time. I do hope that you can solve this little annoyance.

  21. Hei Lars!

    Først og fremst, tusen takk for UnPacker-programmet! Har letet etter noe lignende lenge, og ble veldig glad da jeg oppdaget ditt program. Det er imidlertid en bug jeg har oppdaget som er irriterende som fy, og som jeg sliter med å fikse.

    Hvis jeg kjører UnPacker og pakker ut noen filer, og minimerer UnPacker-vinduet før jeg lukker det ved å høyreklikke på ikonet nede på start-linjen, så får jeg ikke åpnet programmet igjen! Det vil liksom ikke maksimere seg igjen. Jeg har prøvd å tvinge det til å starte i maximized-modus, men da starter kun det scanner-vinduet i maksimert vindu, mens selve UnPacker ikke åpnes. Jeg ser programmet kjører, men jeg får ikke sett vinduet, så jeg får ikke gjort noe.

    Jeg har Windows 7 64-bit, hvis det har noe å si. Håper på tilbakemelding, og igjen, ellers har jeg vært storfornøyd med programmet ditt!

    1. Hei Christopher…

      Det er nok Windows 7 og 64-bit versjonen som er den “store stygge” her… NÃ¥r jeg lagde programmet var ikke engang Vista / W7 pÃ¥tenkt, hehe

      Det kan tenkes at jeg oppdaterer programmet kun for å rette opp i denne vindufeilen, senere, imens gå i registeret her: HKEY_CURRENT_USER/Software/www.Unpacker/www.Unpacker/Settings (dvs bruk regedit.exe)

      Slett disse: ScreenCX, ScreenCY, ScreenMaximized, ScreenX og ScreenY

      Da bør programmet komme fram igjen 🙂

  22. Thks a lot for your work !

    Unpacker is a practical and unescapable tool. moreover, you have used a nice approach for this automation’s problem.

    I use it very often and i just want to say thank you !

    Good luck with your future plans.

  23. Hi,
    Do you know where I can change the landing page(https://localhost/)instead of showLogon.do page.I want to change adito home landing page.I want some additional security.Could you please share some ideas.

  24. Heisann Lars.

    Lurer på om det er mulig for deg å porte unpacker til mac? Finner ikke noe i samme sjanger som dette, og de utpakkingsprogrammene jeg finner til mac er rævdårlige.
    Tenker at det er mulig for deg å lage app, og fÃ¥ den ut på appstore.. Da kan du samtidig ta betalt for tjenesten, og jeg har stor tro på at du kan tjene en god slant på dette programmet 🙂 HÃ¥per pÃ¥ tilbakemelding eller tips til evt liknende program til mac 🙂

  25. Hi Lars,

    Using your MDI-ish which is great except I am unable to print pdf’s now. Is there a fix or workaround?

    Thanks!

    1. Hi Harold

      I tried to replicate the problem you are having, but I haven’t been able to.
      There have been problems with the printer dialog “hiding” in the back, but isn’t the problem is it?

      My little “hack” to highjack the Adobe windows might be a little to aggressive and add the print window one more time.
      But that is speculations, since I cannot replicate.

      -Lars

  26. Hi Lars
    My english are verry bad but i have a question pls.
    I have a Asrock ion 330 with dvd rom http://www.asrock.com/nettop/overview.asp?model=ion%20330#Features
    My question now
    1 sata port are do for the harddisk
    2 sata port will do the slim dvd rom can i do this sata cable http://www.alternate.de/html/product/Sharkoon/Kabel_SATA-eSATA/73534/?
    to link at my 5 Bay DISK station ? http://www.alternate.de/html/product/Sharkoon/5-Bay_RAID-Station/995507/?
    thx for help me

    greets markus

    1. Hi Marcus,
      You English is good enough! 🙂
      An SATA-eSATA adapter should work as expected.
      I believe that the BIOS on the HTPCs from ASRock are equal, so it should handle it (other models has eSATA).
      The Sharkoon should present the drives as one to ensure that it works, but I haven’t any experience with such bay.

      Regards. Lars

      1. Thank you for the fast Replay
        If Santa Clause comming in town to exchange presents, so i will hope he read my list of wishes with the 5 bay station
        i will call you back it it works or not.

        greets from germany

        merry christmas and a prosperous new year

  27. Lars,

    Java7u45 update causes a pop-up warning, when launching apps published on Adito Server (SVN 0.9.1), that “This application will be blocked in future Java Security updates because the JAR file manifest does not contain Permissions attribute”.
    Do you have plans to look in this and possibly recommend solutions to tech-phelbs like me?

    Cheers,

    1. Hi Al,
      Thank you for the feedback regarding the java7u45 upgrade.
      My installer uses the original source code without any modification.
      To fix this problem I have to add the following to the MANIFEST.MF:

      Manifest-Version: 1.0
      Codebase: *
      Permissions: all-permissions
      Application-Library-Allowable-Codebase: *
      Caller-Allowable-Codebase: *
      Application-Name: Digital Certificate
      Ant-Version: Apache Ant 1.8.3 <---- Need to be checked Created-By: 1.6.0_25-b06 (Sun Microsystems Inc.)

      Then it needs to recompile to make a new JAR-file.
      Afterwards the installer need to be repacked with the updated JARs.

      Currently I don't have time to do it, but I might later on.
      It is possible to fix yourself with ANT and tries to setup a compiler for the Adito-source, you could do it yourself.

      If anybody fixes it, please mail me the result for quicker repack for the installer.

      Cheers,
      Lars

  28. Hi Lars,

    I’m programmer and I need some information for my activity: I must integrate client SSL VPN in one soft phone written in JAVA.

    I saw ADITO software that is open source SSL VPN server and Agent as Client (with open source JAVA)

    I need SSL VPN full tunnel mode. I saw that ADITO can only do port forward. There is an “enterprise” edition maybe can be more useful, but I haven’t license to test.

    I must open more ports forward dynamically toward VPN LAN.

    It’s possible with ADITO / agent client? It’s possible achieve an license for “enterprise edition”? There is an application extension for do it? Or I must customize the implementation of server /client ?

    My language of soft phone is JAVA.

    Thanks for some information

    Mauro

    1. Hi Mauro,

      I have nothing todo with the actual code of Adito. I’ve just implemented an Windows installer for it.
      The Enterprise version of SSL Explorer can be tested through https://www.barracuda.com/products/sslvpn that created their own closed source of the application as Enterprise level.

      What you are trying to achive is possible with Adio. It can forward multiple ports.
      But I can not assist regarding the implementation.

      Regards. Lars

  29. Hi Lars,

    I’m having some issues trying to install a SSL certificate from Godaddy.
    Is there any documentation on how to get this working, I’ve tried a few different options to no avail.
    Does Adito support the newer 2048 byte SSL certificates?

    Appreciate any assistance.
    Thanks

    1. Hi bass,

      I’ve no experience with the 2048 byte SSL certs, and if it does not work it probably isn’t supported.
      But I’ve installed a 1024 bit Comodo cert earlier with some fiddle it did work.

      Regards. Lars

    1. It been couple of years since i did it. So wague description. You have to add the “chain” of with ca and such to get it valid. I used a namecheap cert from comodo.

      It was a fiddle but certs always is 😉

    1. after using it, I see autodelete is there 🙂 , but I notice autounpacker is only unpacking one set of rar files to the destination, even if I had more than one folder in source directory. it makes a folder for the other sources, but doesnt unpack them.
      it does make a sfvOK file though.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.